LED industrial and mining lamps always use LED as the light source, which has more advantages than ordinary lighting lamps. Undoubtedly, energy saving, environmental protection, high performance, and long life are in line with everyone's mind.In the past two years, LED lighting fixtures have been rapidly developed in the commercial and industrial fields, but with the improvement of skills, the current LED lighting fixtures have begun to enter the home lighting field and achieved good results
The failure of the LED lamp is caused by the failure of the power supply and the driver and the failure of the LED device itself. Usually, the damage of the LED power supply and driver comes from the over electric shock (EOS) of the input power supply and the open circuit fault of the load end. The overcurrent effect of the input power supply usually damages the drive chip in the drive circuit and causes the breakdown of passive components (such as capacitors). A short-circuit fault on the load
As ordinary consumers, when we choose products, we will consider the price of the product, followed by the appearance quality, and so on. Sometimes the price exceeds the budget, we will choose to abandon the purchase of the product. However, when choosing LED floodlights in the industry, the price factor must be reduced. It's not that they don't care about price, but choose more cost-effective products. How do we choose products that are more suitable for our needs? This is a brief intro
LED high bay light is a very important type of industrial lighting. Its flexible installation method, strong illuminance, and wide illuminance range have been loved by many manufacturers. The main installation methods of high bay lights are: side wall, suspended, and mobile.Side wall installation: The side wall installation of high bay lights is mainly suitable for some light industrial factories. This kind of plant has a relatively low height, lighter workload and high contrast requirements. It
The light source is broken; when assembling the lamp, the workmanship is not perfect, the lamp and the heat sink cannot be in good contact, and the thermal conductive glue is applied unevenly. In addition, if the quality of the lamp bead itself is poor, it will burn out if it is lit for a long time.2. The power supply is broken; the power supply problem has caused some manufacturers to buy products at a lower price and use inferior power supplies, and the product quality is unqualified. After pr
The excellent characteristics of aluminum and its alloys are its appearance, good structure, strong workability, good physical and mechanical properties, and good corrosion resistance. As a result, aluminum has an unparalleled advantage in forging metals. The density of aluminum is only 2.7g/cm3, which is about 1/3 of the density of steel, copper or brass (7.83g/cm3 and 8.93g/cm3, respectively). Under most environmental conditions, including air, water (or salt water), petrochemicals, and many c
Energy-saving high bay lights are lights used in the production and operation areas of factories and mines. In addition to various lighting lamps used in normal environments, energy-saving high bay lamps also include explosion-proof lamps and anti-corrosion lamps used in special environments. Energy-saving high bay lamps are used in some large high bay lights. building. If you want to buy energy-saving industrial and mining lamps, you must go to a formal manufacturer to buy them, so as not to wo
LED industry and mining lamps are one of the main sources of energy saving and reduction of energy consumption in the country. Over the years, LED high bay lights have entered a new stage of upgrading, low-carbon environmental protection has become very important in society, and LED high bay lights happen to have this function. Therefore, it has been vigorously developed, and LED high bay lights will continue to be improved and improved, which is conducive to being well popularized in various fi
LED energy-saving high bay light, using imported LED chip package single high-power LED as the light source, using a unique multiple integrated IC integrated single-point touch light source design, using imported high-brightness semiconductor material chip, high thermal conductivity, low light loss, light Pure color, no double shadow and other characteristics.Its unique heat dissipation design scheme is highly integrated with the household appliance box, and the heat can be transferred and diffu
The types of street lamp products are becoming more and more abundant, and integrated street lamps are a relatively new type. So, what are the characteristics of integrated street lights? This requires professional manufacturers to introduce, let's follow the introduction of Yangzhou Duliang Lighting Co., Ltd. to understand it.1. The integrated design is selected, which is simple, stylish, simple and practical. 2. Use solar power to save electricity and protect the earth's resources.
With the continuous development of the city, more and more places need to use this product of high pole light. Customers who want to buy this product naturally want to know its price. And we all know that the price of high-pole lights will be affected by some factors. Below, professional manufacturers of high-pole lights will give a detailed introduction. Let's take a closer look together.The component elements of the pole body: a 20-meter high pole lamp is usually composed of two sections.
Using solar energy as a power source, you can work in a well-lit place, which can reduce the city's electricity consumption, save more energy, and don't have to worry about power outages or power restrictions; 2. The voltage is low, usually only 17.5V or 36V two specifications, compared to the commercial power supply 220V is still very safe; 3. The standard configuration is usually an LED light source. The light source has a high utilization rate of electric energy and is a cold ligh
LED Technology
Products
Solution
About Us
Video
Project
