Led street light is a kind of outdoor lighting fixture. Its light source uses a new type of LED semiconductor as the luminous body, usually refers to outdoor road lighting fixtures below 6 meters. Its main components are: led light source, lamps, light poles, flanges , The basic embedded parts are composed of 5 parts. Because the LED street lamp has the characteristics of diversity, beauty and beautification and decoration of the environment, it is also called the landscape LED street lamp. LED
As we all know, the origin of high-quality products must come from manufacturers with strong financial strength, because only those manufacturers with strong capital will use the latest technology to produce in order to win the market, will pursue the brand effect of the market, and pay attention to consumers. Use effect, want to win the trust of consumers. Therefore, the quality of the product must pass and be guaranteed, otherwise it will be detrimental to the long-term development of the manu
LED high bay light is a very important type of industrial lighting. Its installation method is flexible, the illuminance is strong, and the illuminance range is wide. It is loved by many manufacturers. The main installation methods of high bay lights are: sidewall, hanging and mobile. Three categories.Side wall installation: The side wall installation of high bay lights is mainly suitable for some light industry factories. This type of plant has a lower height, a lighter workload and a higher co
1. Anti-fouling: In some unique areas, if there are clean purification treatment regulations, the lamps should be anti-fouling;2. Waterproof: The indoor space of some lighting lamps with high environmental humidity should be waterproof to prevent damage to the electrical equipment of the lamps;3. Anti-corrosion: In chemical plants and other places, if the corrosive chemical substances such as acid and alkali are high in the air, there are anti-corrosion regulations for the lamp;4. Explosion-proo
In recent years, LED high bay lights have been widely used in workshops, workshops, warehouses, highway toll stations, large supermarkets, exhibition halls, stadiums, etc. LED high bay lights have replaced the traditional metal halide lamps and energy-saving lamps, and the annual sales volume is very huge. However, today's market demand is no longer as simple as the quality of products and raw materials, but the expected effect of customers in terms of lighting angle and light perception.The
The factory floor is usually required to be bright and easy to work, but do you know the lamps installed in the factory? What kind of lights are used in general factory workshops? Today, the editor will explain to everyone about LED high bay lights!Most LED high bay lights are directly hung on the roof of the workshop, because these lights are illuminated from the roof of the workshop, which will neither affect the sight of the workers nor affect the work.As the global energy situation tends to
LED industrial and mining lamps always use LED as the light source, which has more advantages than ordinary lighting lamps. Undoubtedly, energy saving, environmental protection, high performance, and long life are in line with everyone's mind.In the past two years, LED lighting fixtures have been rapidly developed in the commercial and industrial fields, but with the improvement of skills, the current LED lighting fixtures have begun to enter the home lighting field and achieved good results
The failure of the LED lamp is caused by the failure of the power supply and the driver and the failure of the LED device itself. Usually, the damage of the LED power supply and driver comes from the over electric shock (EOS) of the input power supply and the open circuit fault of the load end. The overcurrent effect of the input power supply usually damages the drive chip in the drive circuit and causes the breakdown of passive components (such as capacitors). A short-circuit fault on the load
As ordinary consumers, when we choose products, we will consider the price of the product, followed by the appearance quality, and so on. Sometimes the price exceeds the budget, we will choose to abandon the purchase of the product. However, when choosing LED floodlights in the industry, the price factor must be reduced. It's not that they don't care about price, but choose more cost-effective products. How do we choose products that are more suitable for our needs? This is a brief intro
LED high bay light is a very important type of industrial lighting. Its flexible installation method, strong illuminance, and wide illuminance range have been loved by many manufacturers. The main installation methods of high bay lights are: side wall, suspended, and mobile.Side wall installation: The side wall installation of high bay lights is mainly suitable for some light industrial factories. This kind of plant has a relatively low height, lighter workload and high contrast requirements. It
The light source is broken; when assembling the lamp, the workmanship is not perfect, the lamp and the heat sink cannot be in good contact, and the thermal conductive glue is applied unevenly. In addition, if the quality of the lamp bead itself is poor, it will burn out if it is lit for a long time.2. The power supply is broken; the power supply problem has caused some manufacturers to buy products at a lower price and use inferior power supplies, and the product quality is unqualified. After pr
The excellent characteristics of aluminum and its alloys are its appearance, good structure, strong workability, good physical and mechanical properties, and good corrosion resistance. As a result, aluminum has an unparalleled advantage in forging metals. The density of aluminum is only 2.7g/cm3, which is about 1/3 of the density of steel, copper or brass (7.83g/cm3 and 8.93g/cm3, respectively). Under most environmental conditions, including air, water (or salt water), petrochemicals, and many c
LED Technology
Products
Solution
About Us
Video
Project
