The so-called "you get what you pay for" street lamps do not mean that expensive is a good thing. It depends on what materials are used. The street lamps are illuminated outdoors, and their waterproofing should be done well.

      Usually, like wind and rain, the damage to the street lamp is particularly prominent, and its appearance is severely corroded, which reduces the service life. In order to prolong the service life of street lights, the waterproof problem becomes very important.

　　 So how to do waterproof work?

The street lamp manufacturer divides its waterproofing into two parts, one is the waterproof of the controller, and the other is the waterproof of the LED lamp. The waterproof of the LED lamp is very simple. You only need to make a simple lampshade, and ordinary electric lamps. The same waterproofing is enough, but the controller of solar street light needs to be very meticulous, because the controller of solar street light is very important. It converts solar energy during the day into electric energy at night.

       You need to pay special attention to waterproofing. The controller of solar street light is very simple to waterproof. It is to do a three-proof paint treatment on the circuit board of the solar street light when installing, and then the rain will slip away along the edge of the controller, so during construction When the solar street light controller tube is turned into a U-shape, the most important thing for the solar street light’s waterproofing is to apply a layer of waterproof glue. The solar street light’s waterproofing is very important, because many areas are rainy. Therefore, solar street light manufacturers pay special attention to these details when making solar street lights. The above are important waterproof measures for solar street lights.

Every street lamp manufacturer uses waterproof glue to waterproof, but because the waterproof glue used by each manufacturer is somewhat different, the waterproof effect is also different. The amount of waterproof glue used is particular, and some manufacturers will reduce the use of waterproof glue and use it. A little bit of waterproof glue, the most important point of the life of the street lamp is the quality of the waterproof effect. If the waterproof effect is good, the life of the street lamp can reach ten years. Once the street lamp is not waterproof, it is generally used for three years The device will short-circuit, so the waterproof performance of the street lamp is directly related to the price of the street lamp.

　　 So the general street lamp adopts the pure aluminum stamping process, the protection level reaches IP66, avoids the influence of dust accumulation and stagnant water, and can resist 17-level wind, and truly achieve integrated waterproofing.

      According to the requirements of different application places, different lenses and combinations can be used to form a variety of powers. The performance is excellent and the effect is remarkable.