Courtyard lights are a kind of outdoor lighting fixtures, usually referring to outdoor road lighting fixtures below 6 meters. Its main components are composed of 5 parts: light source, lamps, light poles, flanges, and foundation embedded parts. It has the characteristics of diversity, beauty and beautification and decoration of the environment, so it is also called landscape courtyard light. Mainly used in urban slow lanes, narrow lanes, residential areas, and tourist attractions.

Outdoor lighting in public places such as squares can prolong people's outdoor activities and improve property safety.

Courtyard lights are mainly used in the decoration of urban roads, residential roads, industrial parks, landscape lighting, tourist attractions, parks and courtyards, green belts, square lighting and lighting. Modern courtyard lighting lamps not only provide good lighting, but also use lighting to show the characteristics and unique style of the building, and to be in harmony with the environment. What is the installation method of courtyard lights?

How to install courtyard lights:

1. It is advisable to use low-power high-color-rendering high-pressure sodium lamps, metal halide lamps, high-pressure mercury lamps and incandescent lamps to install courtyard light sources.

2. Grounding of courtyard lights The grounding of courtyard lights should be strictly observed. The metal pillars and the exposed conductors of the lamps should be connected reliably to the PEN line. The grounding line should be set up with a trunk line. The trunk line should be arranged along the courtyard lights to form a ring network. The grounding trunk line should No less than two points are connected to the trunk line of the grounding device.

3. Power-on trial operation After the lamps have been installed and passed the insulation test, the power-on trial operation is allowed. After power on, you should carefully check and patrol to check whether the control of the lamps is flexible and accurate; whether the switch corresponds to the control sequence of the lamps. If any problems are found, the power should be turned off immediately to find out the cause and repair it.

Precautions for maintenance of courtyard lights:

1. Do not hang objects on the lamp, this will greatly shorten the life of the courtyard lamp;

2. It is necessary to check whether the lamp tube is aging in time and replace it in time. If it is found during the inspection that the two sections of the lamp tube have been red, the lamp tube is black or there are black shadows, then it proves that the lamp tube has begun to age. The replacement of the lamp must be carried out in accordance with the light source parameters provided by the sign;

3. Do not switch frequently, or doing so will greatly reduce the service life of the courtyard light.